Home / Metal Surface Treatment / Tumbling Media / Carbon Steel Pins

Carbon Steel Pins
Steel pins for magnetic polishing machines to grind, polish and deburr metal workpieces, including corners, holes and hard-to-reach areas.
Uses of Magnetic Polishing Steel Pins:
- These pins are specifically used for magnetic polishing machines to grind and polish surfaces and remove burrs from metal workpieces, including corners, holes, and hard-to-reach areas.
- Available sizes (diameter × length): 0.2–12 mm, with common lengths of 5 mm, 8 mm, and 10 mm.
- Made of high-quality 304 stainless steel, with uniform dimensions and high polishing efficiency.
Choose a finer pin size for higher polishing strength. The natural gaps between the pins help maintain stable pressure and improve polishing efficiency.
When selecting for the first time, consider the workpiece material and processing requirements. For stainless steel or harder metals, pins with a diameter of 0.5 mm or larger are generally suitable. For copper, aluminum, or softer materials, pins with a diameter of 0.5 mm or smaller are recommended.
For holes or narrow grooves, it is generally recommended to choose pins with a diameter approximately 5 mm smaller than the hole diameter for better polishing results.
Important Notes
- Steel pins are consumables and can be used multiple times.
- The pins are small and can easily be lost, so handle them carefully during use.
- When not in use, clean and dry the pins before storage.
Need the full specifications? The specification table is in the last photo. For custom sizes, capacities or configurations, contact our team on WhatsApp.











